Alternate Head Selector

Automatic Repeat

The chenille embroidery heads and standard embroidery heads can be switched automatically by presetting on the operation panel.This function switched the control of the two main shaft motors for the chenille embroidery heads and the standard multi-color heads, and is linked with the motor control of each section to simplify elaborate mixed embroidery, which used to be very time-consuming.

A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.

Design Editing

Modify, insert or delete your embroidery design data stitch by stitch.

Looper Base Point Return

Satin Stitch Reduction and Expansion

At the time of thread breakage, the function of looper base point return automatically operates, which makes threading easier.("Manual" setting is also available.)

Increase or decrease actual stitch length according to the stitch length in a design.

Tie-off Function

Frame Back / Forward

At the completion of the moss stitch and ATH operation, the tie-off is automatically made using a chain stitch to avoid the ravelling of thread.

Frame Back / Forward is available in units of stitches, color change or designated stitch count.

New Looper Adopted <PAT>

Origin Return

Threads will be sewn without fail at the start of stitching..

The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.

Clutch Function <PAT>

Automatic Offset / Manual Offset

Desired needles, nipples, and pressers can be raised up to 27 mm higher than the table surface.

Facilitates applique fabric placement and frame changing.

Accurate Frame Drive and Powerful Main Shaft Drive Motor

Automatic Upper / Under Tread Trimming
Device <ATH>

High-performance stepping (pulse) motor driver and high-precision, durable special stepping (pulse) motors offer you quieter and stabler frame driving.

Automatically operates by commands in the design data.

Memory

Power Failure Control Measures

Standard:2,000,000 stitches.

You can continue to operate the machine after power failure during embroidery without being annoyed by misproduction due to design dispacement.

Scale up/down, Rotate

You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.